manualshive.com logo in svg

Fike CyberCat 50 10-070, Руководство по эксплуатации и техническому обслуживанию, Страница: 77 / 122

Поделиться
Скачать
Fike CyberCat 50 10-070 Скачать руководство пользователя страница 77

 

 

5.0 SYSTEM DIAGNOSTICS 

 

UL S2203 

CyberCat 50 Operation Manual 

5-1 

FM 3029134 

 

P/N: 06-368-2 

Rev 4, 08/2013

 

5.1 OVERVIEW 

Problems with the CyberCat 50 system can generally be classified into two categories:  programming 
problems and hardware (including hardware) problems.  Normally hardware problems are annunciated on the 
CyberCat 50 system display.  Programming problems are typically identified when the system operates 
incorrectly in response to a system event. 

The CyberCat 50’s Diagnostics Menus are designed to assist the service technician in isolating and correcting 
hardware faults with the system.  The Service of the CyberCat 50 system shall be performed solely by factory 
certified and qualified technicians that possess a complete understanding of the system hardware and 
functions. 

5.2 DIAGNOSING 

PROBLEMS 

Hardware problems with the system can be isolated to the panel or field devices by removing all field wiring 
and installing the circuit end-of-line resistor directly on the control board or module.  Once you have isolated 
the cause of the problem (main board or field device), you can use the diagnostic menu features to further 
identify the problem.  The CyberCat 50 system controller utilizes surface mount technology (SMT) for easy 
installation and maintenance.  SMT prohibits component-level field repairs. 

5.3 

REMOVING OR REPLACING PANEL COMPONENTS 

If it is determined that a panel component is defective and needs to be replaced: 

1.  First, use the system programming software to download the current system configuration from the 

panel. 

2.  Disconnect the system batteries then remove AC power. 

I 

Caution: 

Removing or replacing system components when power is applied will damage 
the equipment. 

3.  Disconnect field wiring from component(s).  The majority of the CyberCat 50 system components 

have removable terminals to facilitate connection of field wiring. 

4.  Remove and replace the defective system component(s) following the installation instructions 

supplied with the component(s). 

I 

Caution: 

The CyberCat 50 components and field devices contain static sensitive 
components.  Handle the electronics by the edges only and avoid touching the 
integrated components.  Keep all electronics in the protective anti-static bag it 
was shipped in until time for installation.  Always ground yourself with a proper 
wrist strap before handling the module(s).  If the installer is properly grounded at 
all times, damage due to static discharge will not occur.  If the module requires 
repair or return to Fike, it must be shipped in an anti-static bag. 

5.  Reapply power to the system by reconnecting AC power then connecting system batteries. 

6.  Verify proper operation of replaced component(s) before connecting field wiring. 

7.  Reconnect all field wiring. 

8.  Functionally test the operation of the system to verify proper operation. 

Содержание CyberCat 50 10-070



























































































































Отзывы:

Нет отзывов