57
New parent policy for the currently deleted policy’s children policies (if existing)
– If a policy to be deleted served as
a parent policy for other child policies, it must also be substituted. It can be substituted by a policy from that server, by
a policy replicated from upper servers, or by the N/A flag, which means that child policies will be assigned no substitute
policy. We highly recommend that you assign a substitute even if no child policy exists. Another user assigning a child
policy to that policy during the deletion process would cause a conflict.
New policy for replicated clients with the currently deleted or modified policy
– Here you can select a new policy
for clients replicated from lower servers – those that were applied to the one you are currently deleting. As
a replacement you can use any policy from the given server or a replicated policy.
New default policy for lower servers
– If the deleted policy serves as a virtual policy (see section
Global Policy
Settings
), it must be substituted by another one (for more information, see chapter
Virtual policies
). As
a replacement you can use any policy from the given server or the N/A flag.
New default policy for primary clients
– If the deleted policy serves as a virtual policy (see section
Global Policy
Settings
), it must be substituted by another one (for more information, see chapter
Virtual policies
). You can use a
policy from the same server as a replacement.
The same dialog will also open if you disable the
Down replicable
option for a policy and click
OK, Apply
or if you select
another policy from the Policy Tree. This will activate the items
New policy for replicated clients with the currently
deleted or modified policy
or
New default policy for lower servers
.
5.3.9 Special settings
Two additional policies are not located in the Policy Manager but in
Tools
>
Server Options
>
Advanced
>
Edit
Advanced Settings
>
ESET Remote Administrator
>
ERA Server
>
Setup > Policies
.
Interval for policy enforcement (minutes)
:
This feature applies to policies in the specified interval. We recommend the default setting.
Disable policy usage
:
Enable this option to cancel application of policies to servers. We recommend this option if there is a problem with the
policy. If you wish to avoid applying a policy to some clients, then a better solution is to assigning an empty policy.
54
54
