Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 84 / 159

Open information
DESCRIPTION
36 (69)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/SMK Magnus Lindahl MRS3000 Programmers reference manual
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
PROG.DOC
BLOCK TONE OFF TIME (AREA 2 TAB 69)
Value range: 00-FFh, Default 4Bh (= 75 = 750 ms)
Timebase: 10 ms/100 ms
The length of the pause between each of the five block tones, transmitted to the telephone line
before hanging up.
Example:
The block tone shall consist of the sequence:
250 ms on - 750 ms off - 250 ms on etc.
Table Row Data Comment
68 01 19 250 ms
69 01 4B 750 ms
ERROR TONE ON TIME (AREA 2 TAB 70)
Value range: 00-FFh, Default 1E ( = 30 = 300 ms)
Timebase: 10 ms/100 ms
The length of the error tone, transmitted to the telephone line upon erroneous dialling or a failed
WHC-call.
Example:
The length of the error tone shall be 300 ms.
Table Row Data Comment
70 01 1E 300 ms
ANSWER TONE ON TIME (AREA 2 TAB 71)
Value range: 00-FFh, Default 64 ( = 100 = 1 s)
Timebase: 10 ms/100 ms
The length of the answer tone, transmitted to the telephone line when answering an incoming
telephone call and a telephone to mobile call is allowed.
Example:
The length of the error tone shall be 1 s.
Table Row Data Comment
71 01 64 1 s
The following four parameters describe DTMF tones used for different functions in telephone-
mobile calls. DTMF tone 0-D is programmed with the corresponding hexadecimal codes 00-0D.
DTMF * is programmed by the hexadecimal code 0E. DTMF # is programmed by the
hexadecimal code 0F.