Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 18 / 159

Open information
DESCRIPTION
13 (14)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl MRS3000 Overview
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
OVER.DOC
Transfer
Press |Transfer| once for transfer to CU or mobile, twice for transfer to telephone. For transfer to CU or
mobile, dial the address (five digits) to transfer to. For transfer to telephone number, dial the telephone
number, max. 15 digits.
If you are operating the CU with identity 0, and you want it to operate as an interface to the telephone
network, you shall not dial any telephone number. Press |#| to start transfer.
Press |*| to return to normal operation. For the CU that operates as interface to the telephone network,
you need to press |*| three times within three seconds to return to normal operation.
If transfer to another CU is chosen, all calls are redirected to that CU. If transfer to a mobile or a
telephone number is chosen, all individual normal calls (with speech) are transferred.
When dialling the telephone number, the following codes have a special meaning:
|Set-up| = A = wait for dial tone
|Lock| = B = pause, next digit determines the length in seconds
|Repeater| = C = DTMF *
|Monitor| = D = DTMF #
Hexadecimal digits A-F used in programming modes
|Set-up| =
A
|Lock| = B
|Repeater| = C
|Monitor| = D
|Control| = E
|Data| = F