Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 119 / 159

Open information
DESCRIPTION
2 (14)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl
MRS 3000 Received Call Numbers Programmers
Guide
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
CALL.DOC
The manual describes how to program the number specifications of the different calls to receive in
MRS3000.
1)
Press |Set-up|.
•
Actual time is displayed.
2) Press |Set-up| again.
•
CU200 prompts you for the password.
•
Enter the password for received call number programming.
•
There are two different passwords. 44444 gives access to all received call numbers, 00000 gives
access only to received call numbers to telephone, i.e., those with function digits 0, 1, 2 or B.
3) Display looks like: Size: Adr 5,Phone 16
Max calls 0590
•
"Adr" is the number of address digits, usually 5. The address digits correspond to B-digits in
signalling systems A and C.
•
"Phone" is the number of destination digits or phone number digits. Default value is 16.
•
"Calls" specifies how many different call numbers there is room for in the received call number table.
The bigger the size of the "Adr"- and "Phone"-fields, the fewer number of calls can fit into the table.
•
There shouldn't be any reason for changing the "Adr"-field. If you have telephone numbers with more
than 16 digits, however, you will have to change the "Phone"-field.
•
If you don't want to change the "Adr"- or "Phone"-field, just press |
Ü
| (PTT) and carry on with 7)
below.
4) Press |#|.
•
"Adr" flashes. If you want to change the "Adr"-field, do it by entering any value between 1 and 9. If
you don't want to change the value of the "Adr"-filed, continue with 5).
5) Press |#|.
•
"Phone" flashes. If you want to change the content of the "Phone" field, do it entering any value
between 1 and 29.
6) Press |PTT|.
•
The CU200/210 prompts you for a password. If you want to save the changes you have made to the
"Adr"- and "Phone"-fields, enter the correct password. NB! THIS WILL ERASE THE WHOLE
RECEIVED CALL NUMBERS TABLE.
•
If you want to skip the changes, enter any incorrect password. No changes will be saved.
After this, either you have entered a correct or an incorrect password, continue with 3).