Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 17 / 159

Open information
DESCRIPTION
12 (14)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl MRS3000 Overview
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
OVER.DOC
Repeated unanswered alarm calls with speech from the same mobile just update status and route.
Repeated calls from the same mobile alarm transmitter just updates the route, no status is transferred in
this type of calls.
Repeated activation of alarm inputs does not affect the queue, no status or route information is
available.
All in all a mobile can occupy three queue positions. One unanswered alarm call with speech, one
normal/priority status call and one WHC call.
The queues are handled the following way:
Press |Queue|: The CU enters queue mode indicted by flashing queue position digit(s).
In queue mode, the display looks like this:
3 - 17911 : 02 : 54 12345
The two digits following the id is the route and the next two digits is the status
In queue mode the following actions can be taken:
Press |Queue|
To scroll the queue.
Press |*| To delete the displayed queue entry.
Press |#| To copy the queue address and route of the displayed queue entry to the address
and route fields of the display and exits queue mode.
Queue mode is exited when |#| or an erroneous key is pressed or when no key has been pressed for
two seconds.
Short number handling
By dialling one digit (0-9) and |Display|, the corresponding short number is displayed. Short number 1-9
is user programmable, and short number 0 is recall of the last transmitted tone call.
By dialling a five digit address, eventually choosing a route, and pressing |Display|, the CU enters short
number entry mode.
Dial the short number to store it under (1-9) and press |Display| once again. To skip changing of short
number entry, press |*|.
Listen
By choosing a route and pressing |Listen|, the CU occupies the radio and the line at the selected
channel, or takes control of eventual mobile - mobile traffic at the channel already being in use.
Keyboard PTT
Pressing this key causes the internal microphone to be connected.