Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 44 / 159

Open information
DESCRIPTION
17 (21)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl MRS3000 PC programming tool
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-06 A LZB 119 1661
PC.DOC
F4 Next table
If you press the F4 key the next TX tone-table will appear on the screen. The cursor will reside
at the corresponding entry in the new table. This is, together with the command Previous table,
very convenient when you are changing the same entries in several tables. The current table
name is shown at the top of the screen so it will be easier to update the correct table
F5 Def tone system
If you press the F5 key you will enter a menu very much a like the "TX tone table" menu. The
only differences are the variable names, the meaning of them, and the function line at the lower
part of the screen. The choices in this function line is “Save” and “Load”, which have the same
meaning in all tables.
F6 ID tables
If you press the F6 key you will enter a menu very much like the "TX tone table" menu.
The only differences are the variable names, the meaning of them, and the function line at the
lower part of the screen.
The only choice in this function line is “Save” and “Load”, which have the same meaning in all
tables.
To get the meaning of these parameters see the
MRS3000 PROGRAMMER REFERENCE MANUAL.
F7 Alarm inputs
If you press the F7 key you will enter a menu very much like the "TX tone table" menu.
The only differences are the variable names, the meaning of them, and the function line at the
lower part of the screen. The only choice in this function line is “Save” and “Load”, which have
the same meaning in all tables. To get the meaning of these parameters see the
MRS3000 PROGRAMMER REFERENCE MANUAL.
For detailed information about the TX Tone Tables' data, please refer to the
MRS3000
PROGRAMMERS REFERENCE.