Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 51 / 159

Open information
DESCRIPTION
3 (69)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/SMK Magnus Lindahl MRS3000 Programmers reference manual
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
PROG.DOC
The EEPROM content is organized in TABLES and ROWS. Each TABLE consists of a collection of
functionally connected data. The amount of data in a
TABLE is divided into ROWs.
PASSWORDS
Area Enter
Password Additional Password Comment
1 11111 12345 Local CU
2 22222 12345 System options
3 33333 12345 Call tables
4 44444 12345 Call numbers
4 00000 12345 Tele numbers only
5 55555 ----- Clock adjust
99999 Reset LP210
After having entered the password, the display shows the content of the first row of the first table of the
selected programming area. If you for example have dialled the password 11111, you will have entered
area 1 and the display will look like this:
TAB:01 ROW:01 DAT:00
Short number 1
The TAB field flashes. You can now enter any TAB to change to, by either dialling the two digit number
or pressing the |+| and |-| keys to increment and decrement the TAB number.
If you want to change ROW, press |#|. The ROW field now flashes, and you can change the ROW in the
same way as the TAB, described above.
If you want to change DAT (data), press |#| once more. The DAT field now flashes. Enter the data and
press |
Ü
| to make it permanent. If you don't press |
Ü
|, the entered data will be forgotten as soon as you
step to another TAB/ROW. When the DAT field flashes, you can increment and decrement the ROW
field by pressing the |+|- and |-|-keys respectively. By pressing |#| once more, the TAB field starts
flashing again.
Exit programming mode is done by pressing |PTT| three times.
|#| : Switch between TAB-, ROW- and DAT-fields.
|+| : When TAB flashing : increment TAB.
When ROW or DAT flashing : increment ROW.
|-| : When TAB flashing : decrement TAB.
When ROW or DAT flashing : decrement ROW.
|
Ü
| : Pressed once: save the data entered.
Pressed three times : exit programming mode.
The TAB and ROW fields are displayed in decimal representation, but the
data is hexadecimal. The keys corresponding to the hexadecimal digits A-F
are:
|Set-up| =
A
|Lock| = B
|Repeater| = C
|Monitor| = D
|Control| = E
|Data| = F