Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 89 / 159

Open information
DESCRIPTION
41 (69)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/SMK Magnus Lindahl MRS3000 Programmers reference manual
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
PROG.DOC
DIAL MAX TIME (AREA 2 TAB 81)
Value range: 00-FFh, Default 32h (= 50 = 5 s)
Timebase: 100 ms/1 s
The maximum time between DTMF digits when dialling access password, function code, route
and address or WHC address.
Example:
The maximum time between the dialled DTMF digits shall be 5 seconds.
Table Row Data Comment
81 01 32 5 seconds
ACCESS PASSW (AREA 2 TAB 82)
Value range: 00-09h, 0Fh in each ROW
Default: ROW 01 = 01h
ROW 02 = 02h
ROW 03 = 03h
ROW 04 = 04h
ROW 05 = 05h
The access password that must be dialled to gain access to the CU210 from a telephone.
An 0Fh in ROW01 disables the password, i.e., no access password will be needed to gain
access, an 0Fh in ROW02 makes the password consist of one digit, an 0Fh in ROW03 makes
the password consist of two digits, and so on.
Example:
The access password shall be 1 2 3 4 5.
Table Row Data Comment
82 01 01 1
82 02 02 2
82 03 03 3
82 04 04 4
82 05 05 5
AUTOMATIC CALL (AREA 2 TAB 83)
Value range: 00-09h or 0Fh in each ROW
Default 0Fh in all ROWs
If access password is enabled and no access password is dialled or no function code is dialled,
an automatic call is transmitted if enabled. The automatic call can be a group tone call or a
normal tone call.
The meaning of the ROWs in the AUTOMATIC CALL TAB are:
ROW 01: First route digit
ROW 02: Second route digit
ROW 03: First address digit