Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 10 / 159

Open information
DESCRIPTION
5 (14)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl MRS3000 Overview
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-16 A LZB 119 1661
OVER.DOC
Outgoing calls
Address selection
The five-digit address can be chosen in several different ways:
-
Dialling :
In the personality it is specified how many digits you must dial.
Before the call is transmitted, by pressing the |#|-, |Data| or |Status?|-key, the addresses filled up
in a personality specified way to five digits and the call is transmitted.
-
Copy from top of queue:
If the address field of the display is empty, the first queue entry's address and route are copied to
the address and route field of the display by pressing the |#|-key once.
-
Copy from any queue position:
Enter queue mode by pressing the |Queue|-key. Scroll queue by repeatedly pressing |Queue|.
When the |#|- key is pressed, the displayed queue entry's address and route are copied to the
address and route fields of the display.
-
Short number:
Dial one digit (1-9) and press |#|. The corresponding pre-programmed short number's address
and route are copied to the address and route fields of the address display and the call is
transmitted.
To just view, without transmitting, a short number, dial one digit (1-9) and press |Display|.
-
Last number:
Dial |0| |#|. The last transmitted call's address is copied to the address field.
The route remains unchanged.
To just view, without transmitting, last transmitted number, dial |0| |Display|.
-
Group number:
Dial one digit (0-9) and press |Group|. The corresponding pre-programmed group number is
copied to the address field and a group call is transmitted to the specified group.
The group numbers don't contain any route information.
Call to mobile(s)
If the mobile doesn't answer, and the personality is programmed for handshaking requirements on the
chosen channel, a short (error) beep will sound. Group calls never have any handshaking included in
the signalling protocol. If the connection is established a long beep will sound in the loudspeaker. Once
a connection has been established the route cannot be changed. However, the CU can make a new call
to the same mobile, or to other mobiles with the same route. All other CU’s indicate LINE BUSY.
The CU can always clear down the call by pressing |-/-|, a DISCON telegram will be transmitted and the
call will be cleared down.