Ericsson MRS3000, Руководство по обслуживанию на месте

Страница: 48 / 159

Open information
DESCRIPTION
21 (21)
Uppgjord (även faktaansvarig om annan) - Prepared (also subject responsible if other) Nr - No.
KL/ECS/S/MK Magnus Lindahl MRS3000 PC programming tool
Dokansv/Godk - Doc respons/Approved Kontr - Checked Datum - Date Rev File
KL/ECS/S/MK 1997-04-06 A LZB 119 1661
PC.DOC
This menu works exactly as the main menu except that the function "save text" is not available and of
course that the selections in the menu is not the same.
To get back to the main menu you may select Previous menu or press the
ESC key
With the upload command you will be able to load the configuration in the PC, including the short-
number table, to the CU200 or the LP200. This requires that the CU200 be connected to the COM1 port
of the PC via modem or a direct cable.
If the PC is connected to the CU210, select Upload. The data transfer will start within a couple of
seconds.
Note that the uploading takes quit some time.
With the download command you will be able to fetch the configuration, including the short-number
table, from the CU200 or LP200 in to the PC. This requires that the CU200 be connected to the COM1
port of the PC via modem or a direct cable.
If the PC is connected to the CU200, select Download. The data transfer will start within a couple of
seconds.
Note that the downloading takes quit some time.
If you select the "Default values in CU" the program will inform you that all the EEPROM in CU200 will
be overwritten by the default-values. If you select the "Default values in LP" the program will inform you
that all the EEPROM parameters except the short-number table in the LP200 will be overwritten by the
default-values. If you answer this warning with an
Y followed by a carriage return the program will try to
send the CU200/LP200 a command to move the parameters from the default area in prom to the
EEPROM.
Otherwise it will be cancelled.
This command will not affect the short number table in memory.
3.7.1 Previous_menu.
If "Previous menu" is selected in the UPLOAD/DOWNLOAD you will get back to the main menu.
You may also get back to the main menu by pressing the <ESC> key.
3.8 QUIT
With the “quit” selection in the main menu you will exit the program. If you have changed the
configuration and not saved it, the program will warn you about this and give you the possibility to save
the file.