AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
22
1.8.8
Synchronization cable
Standard ISDN cabling
1.8.9
AUX Port cable
Standard ISDN cabling
1.8.10
Fibre cables
The optical interfaces for the AXX 9100 CONNECT are based on
the LC connector. See “SFP Modules” on page 1 -24 for details.
1.8.11
Installing Electrical Cables
Caution!
Wear a grounding wrist strap while unpacking,handling and
interconnecting the AXX 9100 CONNECT equipment modules, to
discharge any static buildup.
To install electrical-connection cables in the AXX 9100 CONNECT,
connect a electrical cable to the corresponding ports of the
transmission system. On the AXX 9100 CONNECT module, the
electrical ports are located at the back of the module.
Ericsson AXXESSIT recommends that you label the electrical cable
at each end to avoid confusion with cables that are similar in
appearance.
Warning!
Follow all directions and warning labels when working with
electrical cables.
