21
3/1531-ZAP 701 14/1 Uen A 2006-10-16
AXX 9100 CONNECT R1.2 Quick Reference Guide
1.8.2
Alarm cable
Ericsson AXXESSIT AS does not provide an alarm cable. The
physical connector is a 9 pin DSUB. The alarm cable would typical
be used to connect the AXX 9100 CONNECT to the rack-top alarm
indicators or to external alarm input sources.
1.8.3
VT-100 cable
The cable connecting the AXX 9100 CONNECT to a workstation is
delivered with the AXX 9100 CONNECT Base Unit. This cable has
RJ-45 connector in one end and a 9 pins DSUB connector in the
other end. The length of the cable is 2m.
1.8.4
LAN cables
Use shielded cables for all LAN interfaces.
N O T E !
Ordinary UTP cable can be used in Management port.
1.8.5
E1 cables
The E1 interfaces is default delivered with 120 Ohm. If 75 Ohm is
requried, external balun/patch panel can be delivered.
1.8.6
E3/T3
The Electrical interfaces for the AXX 9100 CONNECT E3/T3
module is based on the 1.0/2.3 coax connector.
1.8.7
Management cable
UTP Cable
