13
3/1531-ZAP 701 14/1 Uen A 2006-10-16
AXX 9100 CONNECT R1.2 Quick Reference Guide
1.6.1
Install the – 48 VDC Power
Warning!
Before performing any of the following procedures, ensure that
power is removed from the DC circuit.
1.
Insert the wires into the desired connector and fix the wire on the
connector. The following color-coding applies:
Table 3 Power cable - wire color coding
2.
Connect the AXX 9100 CONNECT power cable (with the ground)
to power connector of the back of the AXX 9100 CONNECT as
shown in Figure 4
Figure 4 Location of power connector of the back of the AXX 9100 CONNECT
Caution!
Be sure that the power cable is connected and verify the correct
polarity. Check if it is properly fused.
Wire color coding
Wire carrying
Brown wire
O V
Blue wire
- 48 VDC
Black wire
- 48 VDC
Green/yellow
wire
GND