AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
18
•
TM-3xE3/T3-1.0/2.3
•
TM-1xGEL1-1xMAP-SFP (can only be used in this slot position)
•
TM-4xFEL1-4xMAP-RJ45
•
TM-32xE1-LFH
1.7.2.2
LED - Module failure
There is one status LED indicator on the front of a Service module.
The following indications can be given:
RED
Red indication has several purposes:
•Indicate fault condition. Investigate alarm
conditions for more details.
•Given during power-up.
•Given if System Controller is reset (software
reset) for modules with Ethernet-ports (LAN(x)-
and/or WAN(x)-ports).
GREEN
•Module In-Service.
GREEN FLASHING
•Flashing green LED on Ethernet related modules
during shutdown.
•Flashing green LED after inserting a service
module in Base Unit indicate that the module is
receiving a firmware to align the status for
Network release level stored on the system
controller. This will only be triggered when the
Update policy is enabled for the service module
being inserted. An event will be reported in this
case.
EXTINGUISHED
•Indicates that the module is Out-of-Service.
Module can be removed.
Figure 7 Example of LED for module failure
