AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
30
1.9.5
Cleaning fibre-optic connectors
This section describes dry cleaning techniques for fibre-optic
connectors using lint-free swabs.
Tools
•
1.25mm lint-free swabs (preferably clean room quality)
•
Fibre-scope
Caution!
Read the warning before beginning this procedure.
Warning!
Make sure that the lasers are turned off before beginning the
inspection. Invisible laser radiation may be emitted from
disconnected fibers or connectors. Do not stare into beams or
view directly with optical instruments.
1.
Remove the protective endcap and store it in a small resealable
container.
2.
Inspect the connector with a fibre-scope.
3.
If the connector is dirty, clean it with a lint-free swab.
Figure 16 Cleaning fibre-optic connector with a lint-free swab
4.
Lightly press and turn the swab to clean the ferrule face.
5.
Properly dispose of the swab.
N O T E !
Do not reuse a swab.
