AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
14
T I P !
The power supply has been connected correctly when the
green LED is lit.
1.6.2
Install external ground
The AXX 9100 CONNECT should be grounded via the external
ground connector to facility ground. Locations for the ground
connector on the AXX 9100 CONNECT is shown in Figure
5
Caution!
To avoid damage to the Fan-unit, do not mount ground
connector in the left corner of the connector side.
See Figure 5
Figure 5 Ground connector positions on the AXX 9100 CONNECT
1.
Use a wire-stripping tool to remove approximately 19 mm (0.75
inch) of the covering from the end of the grounding wire.
X
