AXX 9100 CONNECT R1.2 Quick Reference Guide
3/1531-ZAP 701 14/1 Uen A 2006-10-16
28
Figure 13 Inserting an SFP module into an SFP module slot
4.
Remove the dust plugs from the optical ports on fiber-optic SFP
modules and store them for later use.
N O T E !
When you are ready to connect the cable, remove the dust
plugs from the fiber-optic SFP module port and the rubber
caps from the fiber-optic cable. The plugs and caps protect
the SFP module ports and cables from contamination and
ambient light.
1.9.3.2
Removing SFP modules
To remove an SFP module from a module slot, follow these steps:
1.
Disconnect the cable from the SFP module.
T I P !
Note which connector plug is send (TX) and which is receive
(RX) in case you reattach the of fiber-optic cables.
2.
Insert a dust plug into the optical ports of fiber-optic SFP
modules.
3.
Use your index finger to pull the bale out and down to eject the
module.
Figure 14 Bale-Clasp Latch
