background image

ELCART

ELCART DISTRIBUTION SPA  via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY

Tel. +39 02.25117310 Fax +39 02.25117610 sito internet:  www.elcart.com    e-mail: [email protected]

Manuale di istruzioni/Scheda tecnica

La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.

The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.

La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.

ART. 9/7800

PAGINA 1 DI 4

Содержание NI 2100

Страница 1: ...ativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y n...

Страница 2: ...ativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y n...

Страница 3: ... to the circuit 4 6 Range switch position is forbidden to be changed at random during measurement 4 7 Take caution against shock in the course ot measuring voltage higher than DC 60V AC 30V 4 8 Protection fuse should be replaced only with same type and same specification 5 GENERAL SPECIFICATIONS 5 1 Max Voltage between input terminal and Earth Ground CAT II 600V 5 2 Over range Indication display 1...

Страница 4: ...to the V mA jack for a maximum 200mA current for a maximum 10A current move the red lead to the 10A jack 7 4 2 Set the rotary switch at the desired A range position 7 4 3 Connect test leads in series with the load under measurement 7 4 4 You can get reading from LCD The polarity of the red lead connection will be indicated along with the current value NOTE 1 When the value scale to be measured is ...

Отзывы: