Epson Stylus Photo R3000 Series, Руководство пользователя

Страница: 62 / 124

Tip:
Choosing Mid[PrnDriver] or Min[PrnDriver]
decreases the image enlargement ratio. Therefore,
some margins may appear at the edges of the paper
depending on the paper and printing environment.
D
Check other settings and start printing.
Making Settings for Mac OS X
A
Open the Print screen and select the paper size
from the
Paper Size[PrnDriver] option, and
then select a borderless printing method.
U
“Basic Printing Methods (Mac OS X)” on
page 31
The selections for borderless printing methods
are displayed as shown below.
XXXX (Sheet Feeder - Borderless (Auto
Expand))[PrnDriver]
XXXX (Sheet Feeder - Borderless (Retain Size))
[PrnDriver]
XXXX (Fr.-FineArt(Borderless, Auto Expand))
[PrnDriver]
XXXX (Fr.-FineArt(Borderless, Retain Size))
[PrnDriver]
A3+ (Roll Paper - Borderless)[PrnDriver]
A3+ (Roll Paper - Borderless Banner)
[PrnDriver]
Where XXXX is the actual paper size, such as A4.
When using Mac OS X 10.4, or if items on the
Page Setup screen are not displayed on the Print
screen due to the application being used in Mac
OS X 10.6 or 10.5, display the Page Setup screen
and make settings.
B
If Auto Expand is selected for Paper
Size[PrnDriver] , set how much of the image
goes beyond the edge of the paper in the
Expansion[PrnDriver] screen.
Select Page Layout Settings[PrnDriver] from
the list. The following shows how much the
image will be larger than the paper edges.
Max Sizes larger than A4:
Approximately 3 mm past the top,
4.5 mm past the bottom, and 3.5 mm
past the left and right edges
A4 or smaller (excluding 100 × 148
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.):
Approximately 3 mm past the top, 4
mm past the bottom, and 2.5 mm
past the left and right edges
100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,
10 × 15 cm/4 × 6 in.:
Approximately 1.3 mm past the top,
2.5 mm past the bottom, and 2.5 mm
past the left and right edges
Mid ½ of Max
Min ¼ of Max
Epson Stylus Photo R3000 User's Guide
Printing Varieties
62