Epson EcoTank Pro ET-16680 Series, Руководство пользователя

Страница: 273 / 486

The Image Quality of the Sent Fax is Poor
The following causes can be considered.
The Original Type setting is wrong.
Solutions
Select Fax > Fax Settings > Scan Settings > Original Type , and then change the setting. When the
original you are sending contains text and images, set this to Photo .
The resolution is set to low.
Solutions
If you do not know the performance of the sender’s fax machine, set the following before sending a fax.
❏
Select Fax > Fax Settings and then make the Resolution setting to set the highest quality image.
❏
Select Fax > Fax Settings and then enable Direct Send .
Note that if you set Resolution to Super Fine or Ultra Fine but you send the fax without enabling
Direct Send , the fax may be sent at a lower resolution.
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when
ECM
is disabled.
An Image of the Reverse Side of the Original Appears in the Sent Fax
The following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
&
“Placing Originals” on page 37
Solving Problems
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
The Quality of the Sent Fax is Poor
273