Epilog FusionPro 32 Скачать руководство пользователя страница 79

Страница: 79 / 148

Settings/Config Menu

The Settings/Config menu has two sub-menus, System and Network Settings.

System

Once selected, the System Settings display detailed information about the machine. These are factory

settings that should not be changed unless instructed by Epilog Technical Support.

Network

Once selected, the Network Settings allow you to change the IP Address and the Netmask. The IP Address

on this screen should match the IP Address you have assigned your machine in the Job Manager. If you

have multiple machines, each one will need it’s own IP Address. For more information, see

“6. Set the

Fusion Pro’s IP Address” on page 18.

Park Axis

Pressing Park Axis returns the Laser to the Home Position.

Home Axis

Pressing Home Axis repeats the Homing process that happens when the machine powers on.

Home Table

Home Table resets the table height to its Home Position.

• Saved jobs will always be visible at the top of the list with a save icon next to the job name.

•

Pressing and holding down your finger on a job will pull up the job’s settings, allowing

you to view the Speed, Power, and Resolution or Frequency. A save button will also be

visible in the upper right corner that allows you to save the job permanently to the laser.

Speed

This icon indicates the speed settings on the selected job. It ranges from 1-100%.

Power

This icon indicates the power settings on the selected job. It ranges from 1-100%.

DPI

This icon indicates the resolution settings on the selected job. It ranges from 75-1200.

Frequency

This icon indicates the frequency settings on the selected job. It ranges from 1-100%.

Delete Button

The Delete Button will permanently erase jobs from the Job Menu. To

delete a job, select the job in the Job Menu, and then select the Delete

Button. A dialog will pop up to confirm that you want to delete the file.

Select “Yes” and the file will be removed from the Job Menu.

Note:

If you have marked a job as “Saved” and delete the

file, it will still be erased from the Job Menu.

Idle

Job-1

Are you sure you want to delete this file?

Yes

Settings

System
Network

Idle

Park Axis

Home Axis

Home Table

- 75 -

SECTION 6: CONTROL PANEL

Содержание FusionPro 32





















































































































































Результаты поиска

Содержание FusionPro 32

Отзывы:

Похожие инструкции для FusionPro 32

Бренды по названию

Популярные бренды

Epilog FusionPro 32, Оригинальное руководство пользователя

Результаты поиска

Содержание FusionPro 32

Отзывы:

Похожие инструкции для FusionPro 32

Бренды по названию

Популярные бренды