EP Equipment LIST JX0, Руководство по обслуживанию

Страница: 203 / 206

190
REV. 07/2019
SERVICE MANUAL - BATTERY
B
-
-
-
-
-
-
During the use and maintenance of the
lithium-ion battery, the battery or battery
system may have one or more of the
following abnormal conditions, please
organize the professional engineers and
technicians to perform the necessary
processing according to the instructions in
this manual; if you have any questions about
the status or solutions, please contact ep
dealer or after-sales service department of
the company to obtain professional technical
support.
If the battery is found to have abnormal
mechanical characteristics such as swelling,
cracked casing, melted casing, and distortion
of the casing before and during installation,
stop using the battery immediately, place it in
open and well-ventilated space, and contact
the after-sales service.
If abnormalities such as looseness, cracks,
cracks in the insulation layer, burn marks,
etc. of the battery's pole pressing bolts,
conductive strips, main circuit wires and
connectors are found before and during
the installation, stop using the battery
immediately, check the reason for analysis
and give it a fix;
If the polarity of the positive and negative
terminals of the battery is found not match
the polarity identification before installation,
please stop using the battery immediately
and contact the after-sales service
department to replace the battery or obtain
other solutions;
If there is fire or smoke happens to the
battery, move it to the open air immediately,
evacuate people in time, and pour a large
amount of cold water onto the battery to cool
it down and put out the fire.
If the battery is found to emit smoke before
and during installation, immediately stop
using the battery and bury it with sand, and
notify the after-sales service department of
the company for record and obtain technical
support;
B3-4
Common problems and solutions