EP Equipment LIST JX0, Руководство по обслуживанию

Страница: 148 / 206

REV. 07/2019
ELECTRICAL SYSTEM
8
135
Error Message
Possible cause Fault elimination
Error
Error text
148 EP BMS MC OPEN
if the battery charge level is to
low,the BMS require the main
contactor open,this alarm occurs
"1-check the battery charge
level
2-check if the battery is ok
3-replace the BMS"
149 EP BMS TRAC CTB
if the battery charge level is to
low,the BMS require the controller
to reduce the traction speed,this
alarm occurs
"1-check the battery charge
level
2-check if the battery is ok
3-replace the BMS"
150 EP BMS LIFT STOP
if the battery charge level is to
low,the BMS require the controller
to stop the lift function,this alarm
occurs
"1-check the battery charge
level
2-check if the battery is ok
3-replace the BMS"
151 EP BMS TRAC STOP
if the battery charge level is to
low,the BMS require the controller
to stop the traction function,this
alarm occurs
"1-check the battery charge
level
2-check if the battery is ok
3-replace the BMS"
152
"NO CAN TILL EP
NO CAN TILLER EP "
the controller lost the
communication with EP tiller at
least once,when the truck is using
"1-check the wiring of can
cable
2-try to replace the EP tiller
3-replace the controller"
153
"WAIT TILL EP
WAIT TILLER EP "
wait the EP tiller CAN-BUS
communication when key-on
"1-check the wiring of can
cable
2-try to replace the EP tiller
3-replace the controller"
166 VMN NOT OK
167
"WAIT MOT STILL
WAIT MOTOR STILL"
The controller is waiting for the
motor to stop rotating. This warning
can only appear in controllers for
brushless motors.
-