EP Equipment LIST JX0, Руководство по обслуживанию

Страница: 139 / 206

REV. 07/2019
ELECTRICAL SYSTEM
8
126
8.13.3 Settings and Adjustments
8.13.3.1. Set Options
To set options proceed as follows and refer to Table 4-
2:
1. Connect the Zapi Handset, refer to paragraph
8.13.1.1.
2. Press the ROLL up button (1, Figure 90535) and
the SET up button (5) at the same time to enter
the CONFIG MENU.
3. Press the ROLL down button (1) or the ROLL up
button (2) to find the SET OPTIONS display.
4. Press the ENTER button (3) to view the options.
5. Press the ROLL down (2) or the ROLL up button
(1) to find the option to be changed.
6. Press the SET up button (5) or the SET down but-
ton (6) until the desired value setting is reached.
The option is now set at the desired value.
7. Press the OUT button (4) to exit the options
，
Press the Enter button to confirm the exit.
8.13.4 Adjustments
To change an adjustment proceed as follows and
refer to Table 4-3:
1. Connect the Zapi Handset, refer to paragraph
8.13.1.1.
2. Press the ROLL up button (1, Figure 90536) and
the SET up button (5) at the same time to enter
the CONFIG MENU.
3. Press the ROLL down button (1) or the ROLL up
button (2) to find the ADJUSTMENTS display.
4. Press the ENTER button (3) to view the adjust-
ments.
5. Press the ROLL down (2) or the ROLL up button
(1) to find the adjustment to be changed.
6. Press the SET up button (5) or the SET down but-
ton (6) until the desired value setting is reached.
The adjustment is now set at the desired value.
7. Press the OUT button (4) to exit the adjustments,
Press the Enter button to confirm the exit.
Figure 90536 Hand Held Programmer