EP Equipment LIST JX0, Руководство по обслуживанию

Страница: 131 / 206

REV. 07/2019
ELECTRICAL SYSTEM
8
118
Parameters Description Remark
KEY VOLTAGE
Key voltage value measured in real time
(pin A10).
Display the current voltage ( V )
CTRAP THRESOLD This is the voltage of the hardware
overcurrent threshold
Display the current voltage ( V )
CTRAP HW
This is a counter of the number of
occurrence of hardware overcurrent
detection.
%
ELEC.BRAKE VOLT. This value shows the voltage applied on
electro mechanic brake coil
%
OUTP. GATE ALARM It is the status of the EV output for gate
alarm
OFF GND
OUTPUT LED1 NONE OFF GND
OUTPUT LED2 NONE OFF GND
OUTP.EV3-HORN It is the status of the EV output for horn OFF GND
SET-P.EVP-LOWER This value shows the setpoint of
proportional electrovalve lower EVP
%
TAI6 POT NONE Display the current voltage ( V )
TAI5 POT NONE Display the current voltage ( V )
MAIN CONT.VOLT This value shows the voltage applied on
main contactor coil
Display the current voltage ( V )
8.12 TESTER Menu
The parameters in TESTER Menu are real-
time presentation of the running status of the
equipment.
Traction Controller (DUALPMX&HP)