Enterasys SecureStack C2, Руководство по настройке, Страница: 403 / 607

clear rmon history
SecureStack C2 Configuration Guide 13-7
clear rmon history
Use this command to delete one or more RMON history entries or reset one or more entries to
default values. For specific values, refer to “ set rmon history ” on page 13 ‐ 6.
Syntax
clear rmon history { index-list | to-defaults }
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to delete RMON history entry 1:
C2(rw)->clear rmon history 1
Alarm Group Commands
Purpose
To display, configure, and clear RMON alarm entries and properties.
Commands
show rmon alarm
Use this command to display RMON alarm entries. The RMON alarm group periodically takes
statistical samples from RMON variables and compares them with previously configured
thresholds. If the monitored variable crosses a threshold an RMON event is generated.
index ‐ list Specifies one or more history entries to be deleted, causing them to
disappear from any future RMON queries.
to ‐ defaults Resets all history entries to default values. This will cause entries to
reappear in RMON queries.
For information about... Refer to page...
show rmon alarm 13-7
set rmon alarm properties 13-9
set rmon alarm status 13-10
clear rmon alarm 13-11