Enterasys SecureStack C2, Руководство по настройке, Страница: 571 / 607

show maclock
SecureStack C2 Configuration Guide 18-47
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display MAC locking information for
ge
.1.1.
C2(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
------- ------- -------- ------- ---------- --------------- ---------------
ge.1.1 enabled disabled enabled 20 1 00:a0:c9:39:5c:b4
Table 18 ‐ 6 provides an explanation of the command output.
clear maclock 18-51
set maclock static 18-52
clear maclock static 18-52
set maclock firstarrival 18-53
clear maclock firstarrival 18-53
set maclock agefirstarrival 18-54
clear maclock agefirstarrival 18-55
set maclock move 18-55
set maclock trap 18-56
For information about... Refer to page...
port ‐ string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.
Table 18-6 show maclock Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“ Port String Syntax Used in the CLI ” on page 5-2.