Enterasys SecureStack C2, Руководство по настройке, Страница: 48 / 607

Stacking Configuration and Management Commands
2-6 Configuring Switches in a Stack
Stacking Configuration and Management Commands
Purpose
To review, individually configure and manage switches in a SecureStack C2 stack.
Commands
show switch
Use this command to display information about one or more units in the stack.
Syntax
show switch [status] [ unit ]
Parameters
Defaults
If not specified, status and other configuration information about all units will be displayed.
Mode
Switch command, read ‐ only.
Usage
After a stack has been configured, you can use this command to physically confirm the identity of
each unit. When you enter the command with a unit number, the MGR LED of the specified
switch will blink for 10 seconds. The normal state of this LED is off for member units and steady
green for the manager unit.
For information about... Refer to page...
show switch 2-6
show switch switchtype 2-7
show switch stack-ports 2-8
set switch 2-9
set switch copy-fw 2-10
set switch description 2-10
set switch movemanagement 2-11
set switch member 2-11
clear switch member 2-12
status (Optional) Displays power and administrative status information for one
or more units in the stack.
unit (Optional) Specifies the unit(s) for which information will display.