Enterasys SecureStack C2, Руководство по настройке, Страница: 147 / 607

Setting Speed and Duplex Mode
SecureStack C2 Configuration Guide 5-9
Parameters
Defaults
If name is not specified, the alias assigned to the port will be cleared.
Mode
Switch command, read ‐ write.
Examples
This example shows how to assign the alias “Admin” to
ge
.3.3:
C2(rw)->set port alias ge.3.3 Admin
This example shows how to clear the alias for
ge
.3.3:
C2(rw)->set port alias ge.3.3
Setting Speed and Duplex Mode
Purpose
To review and set the operational speed in Mbps and the default duplex mode: Half , for half
duplex, or Full , for full duplex for one or more ports.
Commands
show port speed
Use this command to display the default speed setting on one or more ports.
port ‐ string Specifies the port to which an alias will be assigned. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 5 ‐ 2.
name (Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.
Note: These settings only take effect on ports that have auto-negotiation disabled.
For information about... Refer to page...
show port speed 5-9
set port speed 5-10
show port duplex 5-11
set port duplex 5-14