Enterasys SecureStack C2, Руководство по настройке, Страница: 83 / 607

show port inlinepower
SecureStack C2 Configuration Guide 3-29
Syntax
set inlinepower trap { disable | enable } module-number
Parameters
Mode
Switch command, read ‐ write.
Example
This example shows how to enable PoE trap messaging on module 1:
C2(su)->set inlinepower trap enable 1
show port inlinepower
Use this command to display all ports supporting PoE.
Syntax
show port inlinepower [ port-string ]
Parameters
Defaults
If not specified, information for all PoE ports will be displayed.
Mode
Switch command, read ‐ only.
Example
This example shows how to display PoE information for port
ge.2.1
. In this case, the port’s
administrative state, PoE priority and class have not been changed from default values:
C2(su)->show port inlinepower ge.2.1
Port Type Admin Oper Priority Class Power(W)
---- ---- ----- ---- -------- ----- --------
ge.2.1 wireless auto searching low 0 360
set port inlinepower
Use this command to configure PoE parameters on one or more ports.
Syntax
set port inlinepower port-string {[ admin { off | auto }] [ priority { critical | high
| low }] [ type type ]}
disable | enable Disables or enables PoE trap messaging.
module ‐ number Specifies the module on which to disable or enable trap messaging.
port ‐ string (Optional) Displays information for specific PoE port(s).