Enterasys SecureStack C2, Руководство по настройке, Страница: 299 / 607

show garp timer
SecureStack C2 Configuration Guide 8-21
show garp timer
Use this command to display GARP timer values for one or more ports.
Syntax
show garp timer [port-string ]
Parameters
Defaults
If port ‐ string is not specified, GARP timer information will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display GARP timer information on ports 1 through 10 in slot 1:
C2(su)->show garp timer ge.1.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number Join Leave Leaveall
----------- ---------- ---------- ----------
ge.1.1 20 60 1000
ge.1.2 20 60 1000
ge.1.3 20 60 1000
ge.1.4 20 60 1000
ge.1.5 20 60 1000
ge.1.6 20 60 1000
ge.1.7 20 60 1000
ge.1.8 20 60 1000
ge.1.9 20 60 1000
ge.1.10 20 60 1000
Table 8 ‐ 3 provides an explanation of the command output. For details on using the set gvrp
command to enable or disable GVRP, refer to “ set gvrp ” on page 8 ‐ 22. For details on using the set
garp timer command to change default timer values, refer to “ set garp timer ” on page 8 ‐ 23.
port ‐ string (Optional) Displays GARP timer information for specific port(s). For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 5 ‐ 2.
Note: For a functional description of the terms join , leave , and leaveall timers , refer to the
standard IEEE 802.1Q documentation, which is not supplied with this device.
Table 8-3 show gvrp configuration Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“ Port String Syntax Used in the CLI ” on page 5-2.
Join Join timer setting.
Leave Leave timer setting.
Leaveall Leavall timer setting.