Enterasys SecureStack C2, Руководство по настройке, Страница: 264 / 607

clear spantree adminedge
7-38 Spanning Tree Configuration
Syntax
set spantree adminedge port-string {true | false}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
The default behavior of the edge port administrative status begins with the value set to false
initially after the device is powered up. If a Spanning Tree BDPU is not received on the port within
a few seconds, the status setting changes to true .
Example
This example shows how to set
ge
.1.11 as an edge port:
C2(su)->set spantree adminedge ge.1.11 true
clear spantree adminedge
Use this command to reset a Spanning Tree port to non ‐ edge status.
Syntax
clear spantree adminedge port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset
ge
.1.11 as a non ‐ edge port:
C2(su)->clear spantree adminedge ge.1.11
port ‐ string Specifies the edge port. For a detailed description of possible port ‐ string
values, refer to “ Port String Syntax Used in the CLI ” on page 5 ‐ 2.
true | false Enables ( true ) or disables ( false ) the specified port as a Spanning Tree edge
port.
port ‐ string Specifies port(s) on which to reset edge port status. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 5 ‐ 2.