Enterasys SecureStack C2, Руководство по настройке, Страница: 537 / 607

set dot1x
SecureStack C2 Configuration Guide 18-13
Server timeout: 30
Maximum requests: 2
Reauthentication period: 3600
Reauthentication control: Disabled
set dot1x
Use this command to enable or disable 802.1X authentication, to reauthenticate one or more access
entities, or to reinitialize one or more supplicants.
Syntax
set dot1x { enable | disable | port { init | reauth } { true | false } [ port-strin g] }
Parameters
Defaults
If no ports are specified, the reinitialization or reauthentication setting will be applied to all ports.
Mode
Switch command, read ‐ write.
Usage
Disabling 802.1X authentication globally, by not entering a specific port ‐ string value, will enable
the EAP pass ‐ through feature. EAP pass ‐ through allows client authentication packets to be
forwarded unmodified through the switch to an upstream device.
Examples
This example shows how to enable 802.1X:
C2(su)->set dot1x enable
This example shows how to reinitialize
ge
.1.2:
C2(rw)->set dot1x port init true ge.1.2
set dot1x auth-config
Use this command to configure 802.1X authentication.
Syntax
set dot1x auth-config {[ authcontrolled-portcontrol { auto | forced-auth |
forced-unauth }] [ maxreq value ] [ quietperiod value ] [ reauthenabled { false | true }]
enable | disable Enables or disables 802.1X.
port Enable or disable 802.1X reauthentication or initialization control on one or
more ports.
init | reauth Configure initialization or reauthentication control.
true | false Enable (true) or disable (false) reinitialization/reauthentication.
port ‐ string (Optional) Specifies the port(s) to reinitialize or reauthenticate.