Enterasys SecureStack C2, Руководство по настройке, Страница: 53 / 607

set switch movemanagement
SecureStack C2 Configuration Guide 2-11
set switch movemanagement
Use this command to move management switch functionality from one switch to another.
Syntax
set switch movemanagement fromunit tounit
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to move management functionality from switch 1 to switch 2:
C2(su)->set switch movemenagement 1 2
Moving stack management will unconfigure entire stack including all interfaces.
Are you sure you want to move stack management? (y/n) y
set switch member
Use this command to add a virtual member to a stack. This allows you to preconfigure a switch
before the physical device is actually added to the stack.
Syntax
set switch member unit switch-id
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
Refer to “ Creating a Virtual Switch Configuration ” on page 2 ‐ 4 for more information about how to
add a virtual switch to a stack.
fromunit Specifies the unit number of the current management switch.
tounit Specifies the unit number of the newly ‐ designated management switch.
unit Specifies a unit number for the switch.
switch ‐ id Specifies a switch ID (SID) for the switch. SIDs can be displayed with the
show switch switchtype command.