Enterasys SecureStack C2, Руководство по настройке, Страница: 262 / 607

set spantree adminpathcost
7-36 Spanning Tree Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to display the admin path cost for
ge
.3.4 on SID 1:
C2(su)->show spantree adminpathcost port ge.3.4 sid 1
Port ge.3.4 has a Port Admin Path Cost of 0 on SID 1
set spantree adminpathcost
Use this command to set the administrative path cost on a port and one or more Spanning Trees.
Syntax
set spantree adminpathcost port-string cost [ sid sid ]
Parameters
Defaults
If sid is not specified, admin path cost will be set for Spanning Tree 0.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the admin path cost to 200 for
ge
.3.2 on SID 1:
C2(su)->set spantree adminpathcost ge.3.2 200 sid 1
clear spantree adminpathcost
Use this command to reset the Spanning Tree default value for port admin path cost to 0.
Syntax
clear spantree adminpathcost port-string [ sid sid ]
port ‐ string Specifies the port(s) on which to set an admin path cost. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 5 ‐ 2.
cost Specifies the port path cost. Va1id values are 0 ‐ 200000000 .
sid sid (Optional) Sets the admin path cost for a specific Spanning Tree identifier.
Valid values are 0 ‐ 4094 . If not specified, SID 0 will be assumed.