Enterasys SecureStack C2, Руководство по настройке, Страница: 240 / 607

set spantree mstmap
7-14 Spanning Tree Configuration
set spantree mstmap
Use this command to map one or more filtering database IDs (FIDs) to a SID. Since VLANs are
mapped to FIDs, this essentially maps one or more VLAN IDs to a Spanning Tree (SID).
Syntax
set spantree mstmap fid [ sid sid ]
Parameters
Defaults
If sid is not specified, FID(s) will be mapped to Spanning Tree 0.
Mode
Switch command, read ‐ write.
Example
This example shows how to map FID 3 to SID 2:
C2(su)->set spantree mstmap 3 sid 2
clear spantree mstmap
Use this command to map a FID back to SID 0.
Syntax
clear spantree mstmap fid
Parameters
Defaults
If fid is not specified, all SID to FID mappings will be reset.
Mode
Switch command, read ‐ write.
Example
This example shows how to map FID 2 back to SID 0:
C2(su)->clear spantree mstmap 2
fid Specifies one or more FIDs to assign to the MST. Valid values are 1 ‐ 4093 ,
and must correspond to a VLAN ID created using the set vlan command .
sid sid (Optional) Specifies a Multiple Spanning Tree ID. Valid values are 1 ‐ 4094 ,
and must correspond to a SID created using the set msti command.
fid Specifies one or more FIDs to reset to 0.