Endress+Hauser Proline t-mass 65 MODBUS RS485, Руководство пользователя

Страница: 25 / 62

Proline t-mass 65 MODBUS RS485 USER INTERFACE
Hauser 25
7 USER INTERFACE
Function description, USER INTERFACE group
ASSIGN LINE 1 Description
For assigning a display value to the main line (top line of the local display).
This value is displayed during normal operation.
Options
0 = OFF
1 = MASS FLOW
2 = MASS FLOW IN %
3 = TEMPERATURE
4 = TOTALIZER 1
5 = TOTALIZER 2
13 = CORRECTED VOLUME FLOW
14 = CORRECTED VOLUME FLOW IN %
16 = HEAT FLOW
17 = HEAT FLOW IN %
Factory setting
MASS FLOW
MODBUS register:
Data type:
Access: 2514
Integer
read/write
ASSIGN LINE 2 Description
For assigning a display value to the additional line (bottom line of the local
display).
This value is displayed during normal operation.
Options
0 = OFF
1 = MASS FLOW
2 = MASS FLOW IN %
3 = MASS FLOW BARGRAPH IN %
4 = TEMPERATURE
5 = TOTALIZER 1
6 = TOTALIZER 2
9 = TAG NAME
10 = OPERATING/SYSTEM CONDITIONS
11 = CORRECTED VOLUME FLOW
12 = CORRECTED VOLUME FLOW IN %
13 = CORRECTED VOLUME FLOW BARGRAPH IN %
20 = HEAT FLOW
21 = HEAT FLOW IN %
22 = HEAT FLOW BARGRAPH IN %
Factory setting
TOTALIZER 1
MODBUS register:
Data type:
Access: 2515
Integer
read/write
100% VALUE LINE 1 Prerequisite
This function is only available if one of the following options was selected in the
ASSIGN LINE 1 function (

ä
25):
• MASS FLOW IN %
• CORRECTED VOLUME FLOW IN %
• HEAT FLOW IN %
Description
Use this function to enter the flow value which should be shown on the display
as the 100% value.
User input
5-digit floating-point number
Factory setting
10 kg/h (with mass flow)
10 Nm³/h (with corrected volume flow)
10 kW (with heat flow)
MODBUS register:
Data type:
Access: 2519
Float
read/write