Endress+Hauser Proline Prosonic Flow 93C, Руководство по эксплуатации

Страница: 36 / 90

Operation Proline Prosonic Flow 93C FOUNDATION Fieldbus
36 Hauser
5 Operation
5.1 Quick operation guide
You have a number of options for configuring and commissioning the device:
1. Local display (option)
→
ä
37
The local display enables you to read all important variables directly at the measuring point,
configure device-specific parameters in the field and perform commissioning.
2. Operating programs
→
ä
43
FOUNDATION Fieldbus functions and device-specific parameters are configured primarily via
the fieldbus interface. You can obtain special configuration and operating programs from
various manufacturers for these purposes.
3. Jumpers for diverse hardware settings
→
ä
45
Jumpers on the I/O board provide the means of setting the following hardware parameters for
the FOUNDATION Fieldbus:
• Enabling/disabling the simulation mode in the Function Blocks (e.g. AI, DO Function Block)
• Switching hardware write protection on and off
A0014594
Fig. 23: FOUNDATION Fieldbus operating options
1 Local display for device operation in the field (option)
2A Configuration/operating programs for operating via the FOUNDATION Fieldbus (FF functions, device parameters)
2B Configuration/operating program for operation via the FXA193 service interface (e.g. FieldCare)
3 Jumper/miniature switches for hardware settings (write protection, simulation mode)
2A
3
1
Esc
E
+
-
XXX.XXX.XX
FXA193
2B
Esc
E - +