Endress+Hauser Proline Prosonic Flow 93C, Руководство по эксплуатации

Страница: 22 / 90

Installation Proline Prosonic Flow 93C FOUNDATION Fieldbus
22 Hauser
3.3.2 Installing the wall-mount housing
There are various ways of installing the wall-mount housing:
• Direct wall mounting
• Panel mounting (with separate mounting kit, accessories)
→
ä
23
• Pipe mounting (with separate mounting kit, accessories)
→
ä
23
"
Caution!
• Make sure that the permitted operating temperature range
(–20 to +60 °C (–4 to + °140 F), optionally –40 to +60 °C (–40 to +140 °F) is not exceeded at
the mounting location. Install the device in a shady location. Avoid direct sunlight.
• Always install the wall-mount housing in such a way that the cable entries are pointing down.
Direct wall mounting
1. Drill the holes as shown in the diagram.
2. Remove the cover of the connection compartment (a).
3. Push the two securing screws (b) through the appropriate bores (c) in the housing.
– Securing screws (M6): max. Ø 6.5 mm (0.26 in)
– Screw head: max. Ø 10.5 mm (0.41" in)
4. Secure the transmitter housing to the wall as indicated.
5. Screw the cover of the connection compartment (a) firmly onto the housing.
a0001130–ae
Fig. 15: Direct wall mounting
a
b
c
c
90 (3.54)
35 (1.38)
192 (7.56)
81
.5(
3
.2)
mm (inch)