Emerson Avocent AutoView 2108, Инструкция по установке и эксплуатации

Страница: 48 / 72

42 ..... Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide
The Access Type radio buttons specify how a query is sent to each LDAP target device. When using LDAP,
all usernames, passwords and other information sent between an appliance and an LDAP server are sent as
non-secure clear text. Use LDAPS for secure encrypted communication between an appliance and an LDAP
server.
To configure LDAP server parameters:
1. Select Appliance - Appliance Settings - User Accounts - LDAP Accounts - Overview .
2. Identify the primary and secondary server address, port and access type in the appropriate fields or radio
buttons.
3. Click Save .
LDAP Search parameters
On the LDAP Search page, you can configure the parameters used when searching for LDAP directory
service users.
Use the Search DN field to define an administrator-level user that the appliance uses to log into the directory
service. Once the appliance is authenticated, the directory service grants it access to the directory to perform
the user authentication queries specified on the LDAP Query page. The default values are cn=Administrator,
cn=Users, dc=yourDomainName and dc=com and may be modified. For example, to define an administrator
Distinguished Name (DN) for test.view.com, enter cn=Administrator , cn=Users , dc=test , dc=view and
dc=com . Each Search DN value must be separated by a comma.
The Search Password field is used to authenticate the administrator or user specified in the Search DN field.
Use the Search Base field to define a starting point from which LDAP searches begin. The modifiable default
values are dc=yourDomainName and dc=com. For example, to define a search base for test.com, type
dc=test then dc=com . Each Search Base value must be separated by a comma.
The UID Mask field specifies the search criteria for User ID searches of LDAP target devices. The format
should be in the form <name>=<%1>. The default value is sAMAccountName=%1, which is correct for use
with Active Directory. This field is required for LDAP searches.
To configure LDAP search parameters:
1. Select Appliance - Appliance Settings - User Accounts - LDAP Accounts - Search .
2. Enter the appropriate information in the Search DN, Search Password, Search Base and UID Mask
fields.
3. Click Save .
NOTE: These options cannot be changed if the LDAP Priority is set to LDAP Disabled on the Overview
screen.
LDAP Query parameters
On the LDAP Query page, you can configure the parameters used when performing user authentication
queries.
The appliance performs two different types of queries. Query Mode (Appliance) is used to authenticate
administrators and users attempting to access the appliance itself. Query Mode (Target Device) is used to
authenticate users that are attempting to access attached target devices. Additionally, each type of query has