Emerson Avocent AutoView 2108, Инструкция по установке и эксплуатации

Страница: 16 / 72

10 ..... Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide
To connect a IQ module to each device:
NOTE: When tiering devices, the switch closest to the actual user is the primary switch.
1. Locate the IQ modules for your switch.
2. If you are using a PS/2 IQ module connection, attach the color-coded ends of the IQ module cable to the
appropriate keyboard, monitor, and mouse ports on the first device you will be connecting to this switch.
If you are using a USB connection, attach the plug from the IQ module to the USB port on the first device
you will be connecting to this switch.
3. To the RJ-45 connector on the IQ module, attach one end of the CAT 5 cabling that will run from your IQ
module to the switch.
4. Connect the other end of the CAT 5 cable to the desired ARI port on the back of your switch.
5. Repeat steps 2-4 for all devices you wish to attach.
NOTE: Turn off the switch before servicing. Always disconnect the jumper cord from the power source.
IQ Module Connection