Emerson Avocent AutoView 2108, Инструкция по установке и эксплуатации

Страница: 30 / 72

24 ..... Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide
When the switch discovers a tiered switch, the numbering format changes from switch port to [switch port]-
[switch port] to accommodate each device under that switch.
For example, if a switch is connected to console switch port 6, each device connected to it would be
numbered sequentially. The device using console switch port 6, switch port 1, would be 06-01, the device
using console switch port 6, switch port 2, would be 06-02, and so on.
To assign a device type:
1. In the Devices dialog box, select the desired port number.
2. Click Modify to open the Device Modify dialog box.
3. Choose the number of ports supported by your switch and click OK .
4. Repeat steps 1-3 for each port requiring a device type to be assigned.
Assigning device names
Use the Names dialog box to identify devices by name rather than by port number. The Names list is always
sorted by port order. You can toggle between displaying the name or the EID number of each IQ module, so
even if you move the IQ module/device to another port, the name and configuration will be recognized by the
switch.
NOTE: When it is initially connected, a device will not appear in the Names list until it is turned on. Once an
initial connection has been made, it will appear in the Names list even when turned off.
To access the OSCAR interface Names dialog box, activate the OSCAR interface and click Setup - Names .
NOTE: If new IQ modules are discovered by the switch, the on-screen list will be automatically updated.
The mouse cursor will change into an hourglass during the update. No mouse or keyboard input will be
accepted until the list update is complete.
To assign names to devices:
1. In the Names dialog box, select a device name or port number and click Modify to open the Name
Modify dialog box.
2. Type a name in the New Name box. Names of devices may contain all printable characters.
3. Click OK to assign the new name.
4. Repeat steps 1-3 for each device in the system.
5. Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.
Configuring network settings
Use the Network dialog box to set the Network Speed, Transmission Mode, and Network Configuration
feature.
To change network settings:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.