BO08A01KNXFI01010002.DOC
Din Rail 8 Output Module– Product Handbook
37/51
Eelectron SpA, Via Magenta 77/22, I-20017 Rho (MI), Italia
+39 02.9316681 +39 02.93507688
[email protected] www.eelectron.com
BO08A01KNXFI01010002.DOC
C.F. e P.IVA 11666760159
Capitale sociale: 800.000,00€ interamente versato
Tribunale di Milano 359157-8760-07
CCIAA Milano 148549
Valve Open
“valve open” position (
See note 2
).
Valve Close
“valve closed” position (
See note 2
).
Keep previous state and ignore telegrams
Relay returns in the state it was before
lock function became active
Keep previous state and don’t ignore telegrams
the output channel returns to its condition
prior to the activation of the block unless
you have received a telegram on the
switch object or scenario; in this case,
the last command received is executed.
NOTES:
[1]
: If the parameter “Initial Value for Lock Object” has the same value of “Telegram for Lock
Activation” happens that, on power up, the output channel starts in lock mode, waiting for a
“unlock” telegram in order to become active. Note that, even if the relay starts with lock function
already active it does not go automatically in the position defined by the parameter “Relay
Position when Lock is Active “; because this behaviuor is determined only by the parameter
“Behaviour on power up”
[2]
: The “valve opened” and “valve closed” conditions for each output channels correspond to ON
or OFF condition of the upon the settings made for the “Valve Position when relay is open”
parameter.
