EDM Solution 862, Руководство по установке

Страница: 225 / 262

Optional Equipment 225
EDMSAT - Satellite Siren (SS914)
The EDMSAT Satellite Siren is a totally self contained unit incorporating a high powered siren
and a weatherproof strobe. A 1.2 AH sealed lead acid battery needs to be fitted. The
EDMSAT requires only two wires for operation on which the charging of the battery and
triggering of the siren and strobe are carried out. This is done by pulse code modulating
(PCM) the charging voltage. Any attempt to tamper with the wiring or to substitute an
alternative power source across the wiring will disrupt the data transmission and the EDMSAT
will activate immediately. When the EDMSAT carries out a battery test, the unit will sound
for two seconds if the battery test fails. Refer to the Output Event Type – EDMSAT - Satellite
Siren on page 192 when programming a programmable output for the satellite siren.
Hand Held Programmer (CC814)
The hand held programmer is used to program the locations in the
Solution 862
control
panel. The unit displays the actual location number and the data value currently programmed.
It comes complete with a one metre connecting cable and a socket for an external programming
key. Refer to Programming With The Hand Held Programmer on page 25 for more
information.
Programming Key (CC891)
The programming key is a unique device that will store all programming information
programmed in your control panel once copied to the programming key. The programming
key can hold all your common configuration data such as monitoring station telephone
numbers and zone reporting channels etc.
Alarm Link Software (CC816)
This software package is designed to be used for programming the
Solution 862
control
panel by either the direct connect method or the remote connect method via the telephone line.
All options and features can be accessed using this software as well as maintaining history and
service reports. Refer to "LOCATION 180" on page 117 or 148 to enable this feature. Refer
to Alarm Link Software on page 114 for more information on the remote connect methods.
CP5 Eight Zone LED Codepad (CP508)
This codepad is designed to operate with the
Solution
range of control panels. This codepad
provides indications for up to 8 zones.
CP5 Eight Zone LCD Codepad (CP508L)
This codepad is designed to operate with the
Solution
range of control panels with a fixed
icon display. This codepad provides indications for up to 8 zones.
Night Arm Station (CP105)
The night arm station incorporates a panic button and is designed to allow system operation
from a bedroom or sitting room to arm and disarm the system in STAY Mode 1. Refer to
Option 8 in “LOCATION 427” on page 218 to enable the night arm station to operate with the
system.
Phone Controller (CC911)
The phone controller operates at a frequency of 1400 Hz and allows the user to remotely arm
the system in AWAY Mode via the telephone. This phone controller can also be used to
acknowledge a phone call from the control panel when the system is set up for domestic
dialling.
Electronics Design and Manufacturing Pty Limited ISSUE130