ECI XDM-300, Руководство по установке и обслуживанию

Страница: 121 / 266

XDM-300 Installation and
Maintenance Manual Equipment Installation
417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary 3-63
C
AUTION
:
When inserting a module, make sure to carefully
align it with the cage guide rails. If you feel resistance during
insertion, immediately retract the module and repeat the
process.
Hold the module straight during insertion and removal. Pull
or push it slowly and carefully to avoid touching components
on adjacent modules.
6. Fasten the module to the chassis by tightening the two fastening screws. Do
not use excessive torque when tightening the screws.
7. If you are installing an optical, CWDM, or mixed module with SFP
transceivers, proceed to Installing SFP/XFP transceivers in optical/CWDM
modules and cards (on page
3-65 ).
After inserting all the modules, check for correct installation against the
module insertion diagram. Install blank panels over all free slots.
Installing SIM16_1 modules in quad slots
The quad slots I17 and I18 can be adapted to accommodate one SIM16_1 each
by installing a mechanical adapter.
Figure 3-43: Installing the SIM16_1 mechanical adapter