ECI XDM-300, Руководство по установке и обслуживанию

Страница: 201 / 266

XDM-300 Installation and
Maintenance Manual Maintenance
417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary 4-11
Monitoring Modules Traffic
Monitoring the traffic of STM-1 and other modules operating at a different rate
is similar, and differs only in the location of the monitoring point and LED
indicators.
To monitor the traffic in a non-STM-1 module:
1. Identify the slot number of the module to be monitored.
2. Connect the test equipment to the monitoring point.
3. Select the slot number of the monitored module using the MODULE
selector.
4. Select the channel number of the monitored port using the CHANNEL
selector.
5. Wait for the display to stabilize (stop blinking), and then verify that the
required slot and channel were selected.
6. Verify that the MON indicator of the selected channel lights.
7. Read the test result on the test equipment connected to the monitoring
point.
To monitor the traffic in an STM-1 module:
1. Identify the slot number of the module to be monitored.
2. Connect the test equipment to the monitoring point on the ECU300-F card.
3. Perform Steps 3 to 5 in the previous section.
4. Verify that the MON indicator on the ECU300-F card and the
corresponding MON indicator on the STM-1 module light.
5. Read the test result on the test equipment connected to the monitoring
point.