ECI XDM-300, Руководство по установке и обслуживанию

Страница: 26 / 266

Before You Start XDM-300 Installation and
Maintenance Manual
2-2 ECI Telecom Ltd. Proprietary 417006-2311-0H3-A00
3. Prepare transmission cables at the installation site.
4. Route the required power, alarm, management, and transmission cables to
the intended XDM-300 equipment location (see "
Equipment Installation "
on page 3-1 ).
5. If required, install the equipment racks (see " Rack Installation " on page
B-1 ).
6. Mark the location of each XDM-300 shelf and relevant accessories Fiber
Storage Tray (FST), patch panels, and Optical Distribution Frame (ODF)
on each rack, in accordance with the site installation plan.
N
OTE
:
If you are currently installing an XDM-300 shelf
without TPU protection, you may want to leave sufficient
space above/under the shelf to enable the addition of the
TPU/TPUs at a later stage.
7. When applicable, install the EMS-XDM management station (see the
EMS-XDM User Manual).
8. Install the power distribution and alarm panels – xRAP-B (on page 3-77 ) or
xRAP-100 (on page 3-24 ), and other equipment needed in each rack.
9. Install the XDM-300 shelves in the appropriate rack.
10. For each XDM-300 shelf where optical modules are used, install an FST
above the XDM-300 shelf and route the optical fibers to the FST (see
"
Installing the FST " on page 3-34 ).
N
OTE
:
Even if you are not currently installing an FST, it is
recommended that you leave enough space above the
XDM-300 shelf to enable future installation, in case optical
modules are added to the shelf at a later stage.
11. Install the ECU300/ECU300-F, FCU300, MXC300, and I/O cards in the
shelf (see "
Installing XDM-300 Cards " on page 3-53 ).
12. Install the prescribed I/O modules in the shelf.
13. If applicable, install the TC card and the prescribed TPMs in the TPU.