manualshive.com logo in svg

Eaton Power Xpert Plus 1, Инструкция по установке и эксплуатации, Страница: 168 / 194

Поделиться
Скачать
Eaton Power Xpert Plus 1 Скачать руководство пользователя страница 168

UPS OPERATING INSTRUCTIONS

Power Xpert

 9395 UPS (450–550 kVA) Installation and Operation Manual  

  164201701 Rev 3

 www.eaton.com/powerquality

7-40

11.

Press the 

SELECT

 pushbutton on the UPM 1 Command menu bar.

The UPM status indicates 

SHUTDOWN

. 

The input, output, and battery contactors

open, and the power module is turned off. The remaining UPMs supply the
critical load.

Logic power remains on.

12.

Repeat Steps 8 through 11 selecting 

UPM 2

 to shut down UPM 2.

13.

If the UPS is a Plus 1 model, repeat Steps 8 through 11 selecting 

UPM 4

 to shut

down UPM 4.

14.

Verify the battery breaker or disconnect for the UPS being shut down is open. If
not, open the breaker.

W

 

A

 

R

 

N

 

I

 

N

 

G

Power is present inside the UPS cabinet until the upstream input feeder circuit breaker is opened.

NOTE  

If the UPS contains an input breaker (CB1), DO NOT open the breaker unless no input feeder breaker

is installed.

15.

Open the input and bypass feeder circuit breakers for the UPS being shut down.

The UPS is now completely shut down.

External Communications Failure alarm is active on remaining online UPSs. This
is an expected event and will clear upon UPS restart.

7.4.22

Single UPS Restart

To restart a single UPS from a shutdown state:

1.

Close the MOB for the UPS being restarted.

2.

Close UPS input and bypass feeder circuit breakers for the UPS being restarted.

3.

Unfasten the front door latch and swing the door open on the UPS being
restarted (see Figure 4‐2 on page 4-4).

4.

If input breaker (CB1) is installed on the UPS being restarted and is open, close
the breaker.

5.

Close the door and secure the latch.

6.

On the UPS being restarted, observe the UPS control panel display becoming
active, indicating logic power.

7.

On the UPS being restarted, press the 

CONTROLS

 pushbutton on the main menu

bar. The System Status screen is displayed.

8.

On the System Status screen, verify the UPS status is 

SHUTDOWN

 and the UPM

status is 

SHUTDOWN

.

9.

Close the battery breaker for the UPS being restarted.

10.

Verify no alarms are active on UPS being restarted.

Содержание Power Xpert Plus 1



































































































































































































Отзывы:

Нет отзывов