manualshive.com logo in svg

Eaton Power Xpert Plus 1, Инструкция по установке и эксплуатации, Страница: 101 / 194

Поделиться
Скачать
Eaton Power Xpert Plus 1 Скачать руководство пользователя страница 101

UNDERSTANDING UPS OPERATION

Power Xpert

 9395 UPS (450–550 kVA) Installation and Operation Manual  

  164201701 Rev 3

 www.eaton.com/powerquality

6-3

The battery converter derives its input from the regulated DC output of the rectifier
and provides either a boosted or bucked regulated DC voltage charge current to the
battery. The battery is always connected to the UPS and ready to support the inverter
should the utility input become unavailable.

Static

Switch

Rectifier

Inverter

K1

K3

Battery

Converter

Battery

Battery
Breaker

Main Power Flow

Trickle Current

Energized

De-Energized

Closed

Open

Breakers

Contactors

Static

Switch

K5

Rectifier

Inverter

K1

K3

Main Power Flow

Trickle Current

Energized

De-Energized

Closed

Open

Breakers

Contactors

K2

Bypass Input

Rectifier

Input

Output

NOTE  

On a UPS configured as an IOM, the bypass input, static switch, and K5 are not present.

Input

Breaker

(CB1

Figure 6‐2. Path of Current Through the UPS in Online Mode

The inverter produces a three-phase AC output to a customer's load without the use
of a transformer. The inverter derives regulated DC from the rectifier and uses IGBT
devices and pulse-width modulation (PWM) to produce a regulated and filtered AC
output. The AC output of the inverter is delivered to the system output through the
output contactor K3.

If the utility AC power is interrupted or is out of specification, the UPS automatically
switches to Battery mode to support the critical load without interruption. When utility
power returns, the UPS returns to Online mode.

NOTE  

Bypass mode is not available on a UPS configured as an IOM.

If the UPS becomes overloaded or unavailable, the UPS switches to Bypass mode.
The UPS automatically returns to Online mode when the overload condition is cleared
and system operation is restored within specified limits.

If the UPS suffers an internal failure, it switches automatically to Bypass mode and
remains in that mode until the failure is corrected and the UPS is back in service.

Содержание Power Xpert Plus 1



































































































































































































Отзывы:

Нет отзывов